当前位置：
Home >
Resources >
FAQ

Frequenlty Asked Question


Problems with yellowing Cause: Silicone is exposed to UV light. Useof additives that are not heat resistant. Storage time is too long.

Solution:

Use anti-yellowing agents.

Avoid direct UV exposure.

Check and renew additives regularly.

Mold sticking problem Cause: Mold temperature is too high or toolow.lmproper use of mold release agent, Damage to the moldsurface.

Solution:

Control the mold temperature within the appropriate range.

Use proper amount of mold release agent and apply it evenly.

Inspect and repair the mold surface regularly.

Pacifier aging Cause: Silicone pacifiers may deteriorate during long-term use, manifesting as hardening and brittleness.
Solution:
Replace the nipple regularly, every 1-2 months,
especially if you notice signs of aging.
Bottle deformation Cause: High temperature sterilization orincorrect storage may lead to bottle deformation.
Solution: Avoid prolonged exposure to high temperatures, try to use mild sterilization methods such as steam sterilization or boiling sterilization, and store in a cool and dry place.
Clogged nipple Cause: Milk powder particles or impurities may clogthe nipple hole.
Solution: Thoroughly clean the nipple before use. You can use a special nipple brush to make sure the hole is clear.
Bottle odor Cause: Incomplete cleaning or improper storage ofbottles may lead to odor.
Solution: Wash the bottle thoroughly after each use and sterilize it regularly. You can use vinegar or professional cleaners to remove the odor.
Nipple discoloration Cause: Some detergents or disinfectants maycause discoloration of the teat.

Solution: Use mild detergents and sterilizers and avoid products containing bleaching ingredients.

Bottle leakage Cause: Bottle parts are not fully sealed or damaged.

Solution: Check whether the parts of the bottle are installed correctly and whether they are damaged. Replace seals and other wear parts regularly.

Inappropriate nipple flow Reason: Babies at different stages needdifferent flow rates of nipples, and improper selection may causebabies to have difficulty in drinking milk.
Solution: Check whether the parts of the bottle are installed correctly and whether they are damaged. Replace seals and other wear parts regularly.
Difficulty in bottle cleaning Reason: The internal structure of thebottle is complicated or the residue is difficult to remove.
Solution: Use a special bottle brush and nipple brush to clean every corner thoroughly. If necessary, soak in warm water before cleaning.
Insufficient suction power of the nipple Cause: The nipple hole is toosmall or clogged.
Solution: Use a special bottle brush and nipple brush to clean every corner thoroughly. If necessary, soak in warm water before cleaning.
Cracked bottle Cause: Although silicone bottles are durable, theycan still be cracked under severe impact.
Solution: Use a special bottle brush and nipple brush to clean every corner thoroughly. If necessary, soak in warm water before cleaning.
PHONE
+86 0760-88502258
WhatsApp
+86 19129153775
E-MAIL
info@zslike.com
Office Location
No. 32, Jianye Road, Torch Development Zone, Zhongshan, Guangdong Province.

  • FirstName*

  • LastName*

  • Email*

  • leave word*

Tel：+86 0760-88502258
WhatsAPP：+86 1912913775
WeChat
Consult